MAIRPOWER > Solutions >

Warning

1.Always connect the BLACK clamp to the negative ( - ) terminal of the car battery first, then connect the RED clamp to the positive ( + ) terminal of the car battery to prevent damage to the device and/or the car battery.

 

2.Do not touch the RED and BLACK cable clamps together or connect both cable clamps to the same piece of metal to prevent personal physical injury and damage to the device and/or the vehicle.

 

3.Not recommended to use the jumper cables for any other purpose other than jump starting a vehicle.

 

4.If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery and wait at least 10 seconds before reconnecting the jumper cables to the car battery and attempting to start the engine again to prevent damage to the device and/or the car battery. 

 

5.Recommended Vehicle Engine Displacements for Standard Jump Starting 

 

  • Gas powered vehicles - 6.0L and lower displacements
  • Diesel powered vehicles - 3.0L and lower displacements

 

PLEASE KEEP AWAY FROM CHILDREN AT ALL TIMES!